Skip to content

    Technical Documentation

    Bill of Materials

    A bill of materials or BOM for short, is list of the materials and parts used to create an end product.

    Ths includes all the parts used for making the wiring diagram prototype. I also added additional components, such as the materials for the casing of the product.

    Electronic components

    Part numberManufacturerDescriptionQuantityPrice (incl VAT)Subtotal (incl VAT)Example URL
    ESP32-S3-DevKitC-1-N16R8VEspressif SystemsESP32-S3-WROOM-2-N16R8V1€12,98€12,98link
    SEN0503DFRobotInfrared Beam Break Sensor2€3,50€7,00link
    MB102AZ DeliveryMini Breadboard 400 Pin1€1,99€1,99link
    BC-32627BUD INDUSTRIESDuPont Jumper wire Male-Male 20cm 10 wires5€0,05€0,25link
    BC-32671BUD INDUSTRIESDuPont Jumper wire Male-Female 20cm 10 wires6€0,05€0,30link
    MG996RTianKongRCMG 996R Servo1€7,00€7,00link
    959353Adafruit IndustriesNeoPixel Digital RGB LED Strip1€23,50€23,50link
    KC-1206KINGSTATEPassive Buzzer KC-12061€0,27€0,27link

    Construction materials

    Note

    We have not included the cost of 3D print PLA & wood glue in this BOM. And also the wooden pieces to strengthen the frame.

    ManufacturerDescriptionQuantityPrice (incl VAT)Subtotal (incl VAT)Example URL
    LasersheetsMDF - 4.0 mm FSC® mix 70% - 60x60 cm - bruin3€5,08€15,24link
    123-3DInbus M3x306€0,12€0,72link
    Plexiglass.nlPLEXIGLAS® helder 4 mm1€15,37€15,37link

    Wiring Diagram

    A wiring diagram is a simplified representation of an electrical circuit, which shows the power and signal connections between the components, this includes information on wire colors among other things.

    This is the complete wiring diagram for the product. You can recreate this using the components mentioned in the BOM.

    The color codes for the wires are as follows:

    Wire TypeColor
    3.3V  Red
    GND  Black
    Digital Input  White
    Digital Output  Blue

    Wiring Diagram